Delta 250 Trailer Manual
DELTA 250 TRAILER MANUAL: гидравлическая машина для стыковой сварки трубопроводов диаметром до 250мм, предназначенных для транспортировки воды, газа и других жидкостей. Она сконструирована в соответствии с международными стандартами ISO 21307 ВЫСОКОЕ ДАВЛЕНИЕ / ASTM F2620.
DELTA 250 TRAILER MANUAL...
delta 250 trailer
DELTA 250 TRAILER: гидравлическая машина для стыковой сварки трубопроводов диаметром до 250мм, предназначенных для транспортировки воды, газа и других жидкостей. Она сконструирована в соответствии с международными стандартами ISO 21307 ВЫСОКОЕ ДАВЛЕНИЕ. DELTA 250 TRAILER может...
REMEDY 355
SMALL DIAMETERS FUSION
REMEDY 355 is an independent, high-productivity welding machine driven by tracks and powered by a Diesel on-board generator.
Versatile
- Working range
from Ø 125 to 355 mm
from Ø 4” to 14”IPS
from Ø 4” to 12” DIPS
- Materials: HDPE, PP
- Manual controls
- Tracked welding machine
- Drives over 35% slopes
- In-ditch/user friendly
- In-ditch hoses/cables range/length 7 m - 23 ft
Accurate
- Designed to weld according to:
ISO 21307 High...
delta 355 trailer
DELTA 355 TRAILER welds HDPE, PP pipes and fittings for the transportation of gas, water and other fluids under pressure from 125 mm to 355 mm or from 4” IPS to 14” IPS. It is designed to work according to welding standard ISO 21307 High Pressure.
Machine composition:
- Removable control panel with data-logging, memory up to 4000 welding reports, GPS treacebility; USB port for welding report / data download / firmware upgrade. Easy-life welding control system: hardware...
delta 500 trailer
DELTA 500 TRAILER: гидравлическая машина для стыковой сварки полимерных трубопроводов диаметром до 500мм, предназначенных для транспортировки воды, газа и других жидкостей. Она сконструирована в соответствии с международными стандартами ISO 21307 ВЫСОКОЕ ДАВЛЕНИЕ.
Стандартные...
delta 500 all terrain
DELTA 500 ALL TERRAIN is powered by a low-vibration diesel engine and equipped with front steering wheels and rear traction. The machine is suitable for welding pressure pipes (HDPE, PP) for the transportation of water, gas and other fluids up to Ø 500 mm (20 "IPS).
Built according to the International standards ISO 21307 HIGH PRESSURE.
- Working range from Ø 200 to 500 mm (6" IPS ÷ 20" IPS)
- Welds fittings like elbows, tees, Y-branches and stub flanges
- New RITMO assisted system...
REMEDY 500
REMEDY 500 is an independent, high-productivity welding machine driven by tracks and powered by a Diesel on-board generator. Designed for butt welding HDPE and PP pipes from Ø 200 to 500 mm (from 6” to 20” IPS; from 6” to 18” DIPS). Suitable for ISO 21307 High Pressure and ASTM F2620 fusion standards.
Versatile
- Working range
from Ø 200 to 500 mm
from Ø 6” to 20”IPS
from Ø 6” to 18” DIPS
- Materials: HDPE, PP
- Manual controls
- Tracked welding machine
-...
REMEDY 500 FA
REMEDY 500 FA is an on-site welding machine equipped with a low-vibration diesel engine and tracks. The machine is suitable for welding pressure pipes (HDPE, PP) for the transportation of water, gas and other fluids up to Ø 500 mm. Built according to International Standards.
- Working range from Ø 250 to 500 mm
- CNC welding control system: hardware and software have been developed to interact to each other sharing data during the entire workflow. Once set the welding parameters up,...
delta 630 trailer
DELTA 630 TRAILER: гидравлическая машина для стыковой сварки полимерных трубопроводов диаметром до 500мм, предназначенных для транспортировки воды, газа и других жидкостей. Она сконструирована в соответствии с международными стандартами ISO 21307 ВЫСОКОЕ ДАВЛЕНИЕ.
DELTA 630...
delta 630 all terrain
DELTA 630 ALL TERRAIN сварочная машина для труб и фитингов, предназначена для работы в самых тяжелых полевых условиях.
DELTA 630 ALL TERRAIN претендует на то, чтобы устроить переворот в сфере полевой сварки. Отличается легкостью в настройке и работе.
Например, это касается...
delta 1000 trailer
DELTA 1000 TRAILER is a self-aligning fusion machine, suitable for welding thermoplastic pipes for the transport of water, gas and other fluids under pressure, up to Ø 1000 mm.
Machine can fuse pipes according to the ISO 21307 High Pressure standard.
Standard machine features:
- Machine body mounted on a 4 wheeled chassis, easily removable for working in tight spaces; steel hydraulic clamping with the fast-locking inserts, which allows to place and remove inserts in seconds; self...
REMEDY 1000 EL
REMEDY 1000 EL is an independent, high-productivity welding machine driven by tracks and powered by a Diesel 3.6-cylinder in-line Turbo-Common Rail on-board generator. The machine designed for butt-welding HDPE and PP pipes up to Ø 1000 mm for the transportation of water, gas and other fluids under pressure. The machine can weld according to ISO 21307 High Pressure and ASTM F2620 standards.
- Working range from Ø 355 to 1000 mm
- EASY LIFE welding system that allows the operator to...
ROLLERS
ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.
Special design for ALL TERRAIN and TRAILER LINE.
- HS ROLLER 250 which can sustain pipes up to Ø 250 mm 8" IPS
- HS ROLLER 355 with a working range up to Ø 355 mm 14” IPS
- HS ROLLER 630 with a working range up to Ø 630 mm 24” DIPS
- HS ROLLER 1000 with a...
Italiano
English
Español
Pусский
Deutsch
Français
