plastic welding technology

since 1979

1 2 3 4 5 6 7 8

Electrofusion

   
High Pressure
elektra light
ELEKTRA LIGHT is an universal electrofusion machine, suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE, PP, PP-R couplings from 8 to 48 V). The Elektra Light machine is made in compliance with international standards. This is welding machine’s structure is light weight, so it is extremely easy to carry around. Composed of: machine body, an in built memory with 325 welding cycles - report PDF file - featuring the possibility of...
elektra 315
ELEKTRA 315 is an universal electrofusion machine, suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE, PP, PP-R couplings from 8 to 48 V). The Elektra 315 machine is made in compliance with international standards. Composed of: Machine body, intuitive control panel an in built memory with 500 welding cycles, featuring the possibility of transferring data to a Pc/Laptop and an laser scanner - barcode reading system that allows the...
elektra 500
ELEKTRA 500 is an high performance universal electrofusion machine, suitable for welding HDPE, PP, PP-R couplings (from 8 to 48 V). Composed of:- machine body surrounded by a tubular steel frame, thus creating a protective structure that gives to the welding design and functionality while also serving as transport handle and cable winding - large graphic display that stands out for the size and resolution of the icons, making them easy to read in the setting and welding stages - intuitive...
elektra 1000
ELEKTRA 1000 is an high performance universal electrofusion machine, suitable for welding HDPE, PP, PP-R couplings (from 8 to 48 V). Composed of:- machine body surrounded by a tubular steel frame, thus creating a protective structure that gives to the welding design and functionality while also serving as transport handle and cable winding - large graphic display that stands out for the size and resolution of the icons, making them easy to read in the setting and welding stages -...
elektra TOP
ELEKTRA TOP is a high performance universal electrofusion machine, characterized by its light weight and high efficiency, The machine is suitable to weld HDPE, PP, PP-R couplings (from 8 to 80 V) and has an approximate diameter working range* up to 1600 mm. (½” IPS - 63” IPS) - Steel machine frame containing the newest Ritmo’s electrofusion technology. Safe transportation thanks to Elektra Top’s wide handle which enables a perfect grip and cable winding.- 4000 welding reports...
Low pressure/drainage
universal 315 V1
  UNIVERSAL 315 V1 Electrofusion welding machine: - Low pressure HDPE Ø 32 ÷ 315 mm; - High pressure HDPE Rollmaplast and PP-R from 20 ÷ 315 mm (optional cables)- Graphic display- Auto recognition of fittings- Memory with 350 welding reports- Report in PDF File- Serial/USB connector (optional)- Self-compensation of the current supplied (according to the ambient temperature)- Transport case - Firmware upgradable via USB   STANDARD COMPOSITION - Carrying suitcase- Welding...
mustang 160 V1
This electrofusion machine is suitable for welding electrofusion fittings in HDPE from Ø 32 to Ø 160 mm, for low-pressure conduits. MUSTANG 160 V1 automatically detects connection to the fitting to be welded and compensates current supplied according to ambient temperature. It is also capable of detecting any malfunction that could occur before or during welding procedures. MUSTANG 160 V1 is made in compliance with the current safety standards and Directives, and the structure is light...
Accessories
PIPE CUTTERS
PIPE CUTTERS  are professional tools, essential for the manual cut of plastic pipes up to Ø 315 mm. The TC 108, T1, TU 75, TU 140, T3 and T4 pipe cutters are made with the very best alloys, and are very manageable and practical to use.  The pipe cutters can be fitted with various special blades with appropriate cutting heights and penetration capacities to cut pipes of different materials. The TC 108 and T1 pipe cutters (with special blades) can cut Copper (Cu) and multilayer...
SHEARS
SHEARS are professional tools, essential for the manual cut of plastic pipes, such as PP and PP-R up to PN 25; HDPE, PB and PVDF up to Ø 75 mm. The C2 AC and C3 AC shears are entirely made in steel. Models: - C42available green or orange color  - C2 AC - C3 AC                
turbo
TURBO is the innovative pipe scraper patented by RITMO for pipes and fittings ranging from Ø 20 to 63 mm SDR 6 to 11. TURBO is simple and easy to use. This incredible pipe scraper can work in confined spaces substantially reducing working times, especially during repair operations. The rotating tool allows fast and precise scraping, without defects. Its blades also allow the perfect facing of the pipe ends which have been roughly cut due to a situation which makes the use of a pipe cutter...
PIPE SCRAPERS PS
PS 180 and PS 400 are professional rotary scrapers, essential to prepare the plastic pipes and fittings before electrofusion welding. The tools has an adjustable chuck covering all the Ø of the working range, and a blade holder orbital arm. The PS series guarantees a constant and regular removal of the shaving. The scrapers blade holder permits the scraping of the entire electrical sleeve's lenght, most useful when doing on site repairs. STANDARD COMPOSITION- PS 180 supplied with...
PIPE SCRAPERS RTC
RTC 160 - 315 - 710These professional rotary scrapers, designed and patented by Ritmo, are essential to prepare the plastic pipes and fittings before electrofusion welding. Practical and handy, the pipe scrapers remove the oxidation layer caused by weather and ultraviolet rays. If not removed, the oxidation layer would severely compromise the quality of the joint. Among the main construction features there is a device that makes it possible to maintain the thickness of the continuous chip...
Aligner ECO 20-63
ALIGNER ECO 20-63 is composed by two aluminum axes on which are mounted self-centering clamps made of steel. The clamps, can easily slide through the entire length of the axes.A positioning plate allows to perform welds in line, 30 °, 45 °, 90 ° and T-branches in diameters between 20 and 63 mm.The fixing of the pipes is done via cable ties (supplied) with fastener and quick release.The aligner is versatile and easy to use. Standard composition:Aligner equipped with 4 cable ties.
ICONA-allineatore-63 ALIGNER 63
UNIVERSAL ALIGNER 63: professional tool is essential to hold pipes still and aligned during electrofusion. The UNIVERSAL ALIGNER 63 is made almost entirely in a special Aluminium alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters. The possibility to remove one part of the axis that carries the clamps and one clamp it self, allows the use of tapping tees during the fusion. STANDARD COMPOSITION- Aligner...
ALIGNER 160 LIGHT
UNIVERSAL ALIGNER 160: professional tool is essential to hold pipes still and aligned during electrofusion (from Ø 63 to Ø 160 mm). The UNIVERSAL ALIGNER 160 Light is made almost entirely in a special Aluminium alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters, and on request an additional axle complete with two clamps for welding the tees. Its special quick release clamps grants a rapid extraction of the pipe...
ALIGNER ECO 63 - 180
ALIGNER ECO 63 – 180 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 63 mm to 180 mm. The ALIGNER is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes. The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 30°, 45°, 90°, “in line” and T welding. Axes have V-shaped clamps positioned on them, which are equipped with pipe...
ALIGNER 125 - 500
ALIGNER 125 – 500 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 125 mm to 500 mm. The ALIGNER is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes. The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 45°, 90°, “in line” and T welding. Axes have V-shaped clamps positioned on them, which are equipped with pipe fastening...
REROUNDER
Rerounder the mechanical thread of these steel-made products help remodel the ends of ovalized pipes that need to welded by electrofusion. The manual clamping of the tool stems pushes the ovalized end till its reshaping respects the ovalization range required by most standards, therefore allowing its insertion into an electrical coupling - and avoiding the cost of eliminating a good pipe.  The 3 rerounders cover the following diameters range: 250-400 model for OD from 250 to 400...
SQUEEZER 63-200 - Hydraulic
SQUEEZER 63-200 is an hydraulic squeezer, very effective and useful in the worksite, to stop the gas or water flow in the HDPE pipelines from Ø 63 to 200 mm - SDR 11, SDR 17. Thanks to this all the works on the line can be done in the highest safety conditions. The squeezing action on the pipe is possible thanks to a hydraulic cylinder which is manually actuated by the operator with a pressing lever. The resulting strength is transferred to two cylindrical rods which squeeze the pipe...
SQUEEZER 63
SQUEEZER 63 is a manual tool. Easy and fast to apply, the SQUEEZER is useful in the worksite to stop the gas or water flow in the Polyethylene pipelines from Ø 16 to 63 mm / SDR 11;  SDR 17. The squeezing action runs by a movable cylindric bar and by an opposite one. The second bar can be removed to permit the pipe insertion. Two special stop templates with 4 positions (on the movable bar sides) assure a safe pipe squeeze on all working range diameters.
CHAMFERING
CHAMFERING tools are designed to make a bevel on the outside edge of a pipe end for socket fusion / electrofusion. This Chamfer allows heater faces and socket fittings to be easily pushed onto the pipe end.  
BEVELERS
BEVELERS, these are professional tools for bevelling the ends of plastic pipes up to Ø 315 mm, that will be inserted into electrical couplers or plug-in joints. The SME 1 and SME 2 PLUS bevelers are made in a special Aluminum alloy. The special shape of the blades and the non-stick coating (PTFE) of the walls, allow a quick and easy bevel of the pipe. STANDARD COMPOSITION- Beveler body with blade
MAYA 20-63
MAYA 20-63, manual tool for beveling the ends of plastic pipes for electrofusion, socket fusion, pipe connection. Maya 20-63 covers a range from 20 to 63 mm. Compact and lightweight this chamfering tool proves to be a useful tool to always have in the toolbox.