TOPGEAR 630
TOPGEAR 630 is the perfect solution to jobsite plastic pipe cutting difficulties, where while safety remains one of the most important points, the cutting time is a key factor for productivity.
- CUT PRECISION
- SAFETY CONDITIONS
- OVILIZED PIPE CUTTING
- CUTTING CAPACITY PIPE WALL THICKNESS UP TO 80 mm
- USER FRIENDLY
Patent pending
With the aim of combining these two aspects Ritmo developed an innovative portable pipe saw for jobsite pipe cutting. Whatever the job-site...
PIPE CUTTERS
PIPE CUTTERS are professional tools, essential for the manual cut of plastic pipes up to Ø 315 mm.
The TC 108, T1, TU 75, TU 140, T3 and T4 pipe cutters are made with the very best alloys, and are very manageable and practical to use.
The pipe cutters can be fitted with various special blades with appropriate cutting heights and penetration capacities to cut pipes of different materials. The TC 108 and T1 pipe cutters (with special blades) can cut Copper (Cu) and multilayer...
APP - SET & GO! PRO
"SET & GO PRO" a Professional application for smartphones and tablets (Android) that changes forever the way to work with the Ritmo Easy Life butt fusion machines.
"SET & GO PRO" Put together the ease of use, innovation and quality, in a system with the advantages of a CNC welding system, but reducing significantly the costs of it.
ADVANTAGES
It eliminates the expensive hardware of a data-logging and offer the highest quality at the lowest cost.
HOW DOES IT WORK?
Set-up the...
THE INSPECTOR
THE INSPECTOR - DATA LOGGING that controls, records and generates a PDF report of the entire welding process. The Inspector is an “open system” that can be used with Ritmo machines or others. The large graphic display allows an easy reading of welding reports. THE INSPECTOR is installed in a hard case made of PP, with protection degree IP 67. It is sold with a bag that contains the data logging and the battery charger with international adapters.
- Preloaded Major Welding Standard...
RID - internal debeader
Internal Debeader by RITMO S.p.A. covering a range from Ø 90 up to 630 mm (3" IPS ÷ 24" IPS)
ADVANTAGES: Intuitive and easy to use, accurate, versatile, composed of few parts.
- Internal Debeader Head 90 - 110 mm
- Internal Debeader Head 125 - 160 mm
- Internal Debeader Head 160 - 200 mm
- Internal Debeader Head 225 - 315 mm
- Internal Debeader Head 355 - 500 mm
- Internal Debeader Head 560 - 630 mm
Internal Debeader Heand can be ordered separately too.
A complete kit set is...
RED - external debeader
RED - Ritmo External Debeader
Intuitive, Easy to use, Accurate, Versatile.
For pipes up to 1200 mm and sheets
External Debeader by RITMO S.p.A. covering a range from Ø 63 up to 1200 mm!
Designed to remove the external bead from a complete butt fusion welded joint.
The tool knocks onto the pipe bead, then alignment blocks slide against the pipe surface to guide it around the pipe
The blade cuts the under the bead and the handle helps pull the tool around the pipe, cutting the bead...
ROLLER 355
LIGHT - STRONG - ECONOMIC
This device is essential for supporting the pipes while they are being welded with the butt fusion machines.
The roller minimizes pipe friction and drag force independently of the jobsite conditions.
- ROLLER 355 can sustain pipes up to Ø 355 mm. (14” IPS).
Easy to use and light.
- ROLLER 355 can be used not only with HDPE, PP plastic pipes etc. but also with other materials such as rubber pipes, ferrous pipes etc. Mandatory requirement of smooth...
ROLLER 1000
ROLLER 1000 is essential for supporting the pipes while they are being welded with the butt fusion machines.
The roller minimise pipe friction and drag force no matter which is the construction site condition.
- ROLLER 1000 which can sustain pipes from Ø 315 to 1000 mm. The structure is light weight, so it is easy to carry and use.
HS ROLLERS
ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.
Special design for ALL TERRAIN and TRAILER LINE.
- HS ROLLER 250 which can sustain pipes up to Ø 250 mm 8" IPS
- HS ROLLER 355 with a working range up to Ø 355 mm 14” IPS
- HS ROLLER 630 with a working range up to Ø 630 mm 24” DIPS
- HS ROLLER 1000 with...
PIPE SUPPORT
EASY TO USE
VERSATILE
UP TO Ø 400 mm; 1.5" ÷ 15,7"
With this practical piece of equipment, the pipe can be locked to let the operator carry out quickly and with precision all operations previous to the welding cycle, like cutting, pickling, scraping, etc. This support’s particular structure helps reach several inclination angles and heights, in order to better adapt to the requirements of the building site.
Locking takes place via a ratchet strap system, allowing safe and fast...
SHEARS
SHEARS are professional tools, essential for the manual cut of plastic pipes, such as PP and PP-R up to PN 25; HDPE, PB and PVDF up to Ø 75 mm.
The C2 AC and C3 AC shears are entirely made in steel.
Models:
- C42
available green or orange color
- C2 AC
- C3 AC
turbo
Precise - Fast - Easy to use
TURBO scrapers are designed to work in confined jobsite spaces, significantly reducing the scraping time.
The rotating tool enables a quick and accurate scraping without imperfections.
TURBO is patented by Ritmo.
IT1399090 - EP2368656 - US 9021926B2
Thanks to the introduction of new models, the diameter range of Turbo in now extended up to 125 mm. The metal models range from 16 to 63mm and they carry our two functions: pipe scraping and facing,...
PIPE SCRAPERS PS
PS 180 and PS 400 are professional rotary scrapers, essential to prepare the plastic pipes and fittings before electrofusion welding.
The tools has an adjustable chuck covering all the Ø of the working range, and a blade holder orbital arm.
The PS series guarantees a constant and regular removal of the shaving.
The scrapers blade holder permits the scraping of the entire electrical sleeve's lenght, most useful when doing on site repairs.
STANDARD COMPOSITION
- PS 180 supplied with...
PIPE SCRAPERS RTC
RTC 160 - 315 - 500 - 710
These professional rotary scrapers, designed and patented by Ritmo, are essential to prepare the plastic pipes and fittings before electrofusion welding.
Practical and handy, the pipe scrapers remove the oxidation layer caused by weather and ultraviolet rays. If not removed, the oxidation layer would severely compromise the quality of the joint. Among the main construction features there is a device that makes it possible to maintain the thickness of the...
KELA 16-63
Kela is a universal and compact aligner suitable for plastic pipes, fittings and electrofusion saddles.
Thanks to its particular clamp design, it is possible to aligne pipes and fittings in a straight position or at 45° and 90°.
Kela is equipped with two plates: a wide and a narrow one, to be used according to the application.
The wide plates are used for the straight alignement and give a better grip and positioning, while the narrow plates are designed to make Kela more compact...
Aligner ECO 20-63
ALIGNER ECO 20-63 is composed by two aluminum axes on which are mounted self-centering clamps made of steel.
The clamps, can easily slide through the entire length of the axes.
A positioning plate allows to perform welds in line, 30 °, 45 °, 90 ° and T-branches in diameters between 20 and 63 mm.
The fixing of the pipes is done via cable ties (supplied) with fastener and quick release.
The aligner is versatile and easy to use.
Standard composition:
Aligner equipped with 4 cable...
ALIGNER 63
UNIVERSAL ALIGNER 63: professional tool is essential to hold pipes still and aligned during electrofusion.
The UNIVERSAL ALIGNER 63 is made almost entirely in a special Aluminium alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters.
The possibility to remove one part of the axis that carries the clamps and one clamp it self, allows the use of tapping tees during the fusion.
STANDARD COMPOSITION
- Aligner...
UNIVERSAL ALIGNER 160 LIGHT
UNIVERSAL ALIGNER 160: professional tool is essential to hold pipes still and aligned during electrofusion (from Ø 63 to Ø 160 mm - 2” IPS - 6” IPS).
The UNIVERSAL ALIGNER 160 Light is made almost entirely in a special Aluminium alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters, and on request an additional axle complete with two clamps for welding the tees.
Its special quick release clamps grants a...
ALIGNER ECO 63 - 180
ALIGNER ECO 63 – 180 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 63 mm to 180 mm.
The ALIGNER is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes.
The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 30°, 45°, 90°, “in line” and T welding.
Axes have V-shaped clamps positioned on them, which are equipped with...
ALIGNER 125 - 500
ALIGNER 125 – 500 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 125 mm to 500 mm.
The ALIGNER is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes.
The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 45°, 90°, “in line” and T welding.
Axes have V-shaped clamps positioned on them, which are equipped with pipe...
REROUNDER
Rerounder the mechanical thread of these steel-made products help remodel the ends of ovalized pipes that need to welded by electrofusion.
The manual clamping of the tool stems pushes the ovalized end till its reshaping respects the ovalization range required by most standards, therefore allowing its insertion into an electrical coupling - and avoiding the cost of eliminating a good pipe.
The 3 rerounders cover the following diameters range:
250-400 model for OD from 250 to 400...
SQUEEZER 63-200
SQUEEZER 63-200 is an hydraulic squeezer, very effective and useful in the worksite, to stop the gas or water flow in the HDPE pipelines from Ø 63 to 200 mm - SDR 11, SDR 17.
Thanks to this all the works on the line can be done in the highest safety conditions. The squeezing action on the pipe is possible thanks to a hydraulic cylinder which is manually actuated by the operator with a pressing lever.
The resulting strength is transferred to two cylindrical rods which squeeze the pipe...
SQUEEZER 63
SQUEEZER 63 is a manual tool.
Easy and fast to apply, the SQUEEZER is useful in the worksite to stop the gas or water flow in the Polyethylene pipelines from Ø 16 to 63 mm / SDR 11; SDR 17.
The squeezing action runs by a movable cylindric bar and by an opposite one. The second bar can be removed to permit the pipe insertion. Two special stop templates with 4 positions (on the movable bar sides) assure a safe pipe squeeze on all working range diameters.
COLD RING
COLD RING
Useful tool used to clamp, hold and round at the desidered place the pipe in order to weld it properly.
CHAMFERING
CHAMFERING tools are designed to make a bevel on the outside edge of a pipe end for socket fusion / electrofusion.
This Chamfer allows heater faces and socket fittings to be easily pushed onto the pipe end.
BEVELERS
These are professional tools for bevelling the ends of plastic pipes up to Ø 315 mm (10” IPS), that will be inserted into electrical couplers or plug-in joints.
The SME 1 is made in plastic; SME 2 PLUS is made in a special Aluminum alloy.
The special shape of the blades and the non-stick coating (PTFE)
STANDARD COMPOSITION
- Beveler body with blade
MAYA 20-63
MAYA 20-63, manual tool for beveling the ends of plastic pipes for electrofusion, socket fusion, pipe connection.
Maya 20-63 covers a range from 20 to 63 mm.
Compact and lightweight this chamfering tool proves to be a useful tool to always have in the toolbox.
Italiano
English
Español
Pусский
Deutsch
Français
